You are here

non-touch

Amico Apc-60hf, 60 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 115/230v Cutting

   AMICO Power APC-60HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20-60 amps Plasma Cutter Machine with. Advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, APC-60HF Air Plasma Cutter cuts a thickness of 4/5 in. And the max severance thickness is 1.2 in. Easily cutting surface is rough, the serious rust, with oil and spray paint ...

Tig Welder / Plasma Cutter 200 Amp Pilot Arc Non-touch Arc Starting Cat520dp

  CAT520DP Pilot Arc Air Plasma/TIG/MMA 3 in 1 welding machine CAT520DP is Pilot Arc full new design 3 in 1 machine Plasma cutter/Tig/MMA welder, High quality Fuji IGBT, Lightweight but powerful, The current range for this machine, CUT: 15-50Amps, TIG: 15-200Amps, MMA: 15-200Amps; Post time for the machine can be adjust for CUT and TIG, Auto dual voltage 110/220v (120/240v), Machine can auto indicate the voltage 110 or 220v no need to set anything from panel board, Machine with 2T/4T function, very convenient for TIG welding, The second for post time from 2 to 8 seconds can be adjust, Air ...

Lotos Ltp5000d 50amp Non-touch Pilot Arc Plasma Cutter Dual Voltage 110v/220v

  As one of the largest manufacturers of plasma cutting, TIG/stick, arc (MMA) welding equipment, Lotos Technology employs the latest high frequency inverter technology, which utilizes MOS-FET to deliver a far more constant, concentrated and precise current to the cutting surface. This technology substantially reduces the size and weight of the plasma cutter and TIG welder. It helps the operator to easily achieve smooth, clean cuts of a wide range of surfaces and materials e. Stainless steel, alloy steel, brass, aluminum and other conductive material with reduced heat and without distortion ...

Cut-100 100-amp Non-touch Pilot Arc Plasma Cutter Digital Inverter Igbt Cut 35mm

   Non-Touch Pilot Arc Plasma Cutter CUT-100 IGBT Inverter Max cut 35mm. This is our new plasma cutter features advanced dual IGBT inverter technology for more energy-saving. It equips with good plasma torch, suitable to cut most metals, like: stainless steel, alloy, aluminum, mild steel, carbon steel etc. It will provide you a professional cutting function, no matter you're a professional or DIY user. Powerful & reliable product you cannot miss!! This plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc. ...

50amp Inverter Non-touch Pilot Arc Plasma Cutter, 110v & 230v Dual Voltage

   CUT-50F 50Amp Inverter Non-Touch Pilot Arc Plasma Cutter 110V&230V. The Plasma Cutter CUT-50F can be cut without problems all conductive metals. Such as aluminum, steel, copper, brass, titanium and so on. EASY TO USE-Absolutely easy to use with non-touch pilot arc ignition, a light stroke over the workpiece is sufficient. SMART COOLING-Fast cooling fan, allows maximum power consumption, increases the operating time (ED) of the unit. OVERHEAT PROTECTION-Overheat protection starts, the unit is overloaded. A yellow indicator light turns on, goes out as soon as the unit has cooled ...

Non-touch Pilot Arc Plasma Cutter Cut50f 220v 18 Consumables 50amp Cutting New

   Digital Display Plasma Cutter 50AMP. Includes 18 Consumables for Free which. Are made up of 6 cups, 6 tips & 6 electrodes. This Low Price is Only For a Limited Time so Get That Plasma Cutter You Always Wanted Today!! CUT50F Air Inverter Plasma Cutter Welder. 208/220vac 50/60HZ Input Single Phase 1PH. 3" Per minute at 1" Steel (Severance Cut). 7" Per minute at 3/4" Thick Steel. 17" Per minute at 1/2" Thick Steel. 100% Duty cycle at 40amp cut setting. 60% Duty cycle at 50amp cut setting. Plasma Cutter Contains Toshiba Mosfets. CUT50F PILOT ARC SINGLE VOLTAGE 220V Digital ...

Lotos Non-touch Pilot Arc Plasma Cutter Ltp5000d 50amp Dual Voltage 110v/220v

   Lotos Non-Touch Pilot Arc Plasma Cutter LTP5000D 50Amp Dual Voltage 110V/220V. Product Details: Unit is Used power on but not fully tested. As one of the largest manufacturers of plasma cutting, TIG/stick, arc (MMA) welding equipment, Lotos Technology employs the latest high frequency inverter technology, which utilizes MOS-FET to deliver a far more constant, concentrated and precise current to the cutting surface. This technology substantially reduces the size and weight of the plasma cutter and TIG welder. It helps the operator to easily achieve smooth, clean cuts of a wide range of ...

Amico Apc-70hf, 70 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 115/230v Cutting

   AMICO Power APC-70HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20-70 amps Plasma Cutter Machine with. Advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, APC-70HF Air Plasma Cutter cuts a thickness of 1.0 in. And the max severance thickness is 1.5 in. Easily cutting surface is rough, the serious rust, with oil and spray paint ...

Cut-50hf, Pro. 50 Amp Non-touch Pilot Arc Plasma Cutter, Ac 95v260v Cutting New

   CUT-50HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20-50 amps Plasma Cutter Machine with. Advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CUT-50HF Air Plasma Cutter cuts a thickness of 3/5 in. And the max severance thickness is 1.0 in. Easily cutting surface is rough, the serious rust, with oil and spray paint of metal ...

Cut-50hf, 50 Amp Plasma Cutter, Non-touch Pilot Arc, 95v260v, 3/5 In. Clean Cut

   CUT-50HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20-50 amps Plasma Cutter Machine with. Advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, CUT-50HF Air Plasma Cutter cuts a thickness of 3/5 in. And the max severance thickness is 1.0 in. Easily cutting surface is rough, the serious rust, with oil and spray paint of metal ...

Pages