You are here

Lotos Cut60d 60amp Digital Control Cnc Non-touch Pilot Plasma Cutter

Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter

Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter


Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter

Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter



Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter
Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter
Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter




Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter   Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter



LOTOS TECHNOLOGY SUPREME CUT60D 60AMP DIGITAL CONTROL CNC NON-TOUCH PILOT PLASMA CUTTER WITH PLASMA GOUGING FUNCTION, NON-HF BLOWBACK ARC START CNC PLASMA CUTTER METAL CUTTER. Expanded/punched metal cutting by using Continuous pilot arc model. CNC ENABLED Pre-installed 12-PIN CNC Interface with VHC (Voltage Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer. Italy made Trafimet ERGOCUT S65 torch features a BLOWBACK design with a Euro-type central connector.

SETUP WITHIN 1 MIN The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. Trafimet ERGOCUT S65 torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be set up quickly within 1 min. INPUT & OUTPUT Automatic Dual Voltage / Dual Frequency (110/120 220/240 V 50/60Hz). 20-60 A DC output, 4/5 ideal clean cut and 1 1/4 maximum severance cut under 220/240V.

20-30A DC output, 1/3" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost. PACKAGE INCLUDES Power supply, Trafimet ERGOCUT S65 blowback cutting torch, ground clamp, Pre-installed NPT 1/4 industry type D plug and Air filter regulator, consumables, Flow Meter, 12-PIN CNC Connector, 120V/240V Converter, Instruction Manual, Hand-Held Shield, Wire Brush, etc.

The new, redesigned LOTOS Supreme CUT series is a non-high frequency start machine. The blow-back type start that is used is generally safe for use in CNC applications and is ideal for general use. Blow-back type start involves a rearward movement of the electrode within the torch head when forced by the air pressure. The movement of the electrode off its seated position against the inner surface of the circuit grounded nozzle creates a spark, energizing the plasma stream. With this machines start type and pilot arc design, you are able to cut on any metal surface without having to contact to strike an arc which is ideal for cutting items like expanded metal or uneven surfaces.


This CNC cutting machine has a wide range of uses which is suitable for cutting: stainless steel, alloy steel, mild steel, copper and other. There are several other key features on the Supreme Cut series.
With the reliable Blow-Back non-high frequency start, the LOTOS Supreme CUT60D is suitable for CNC application meaning there will be no interference on your CNC computer system. Italy made Trafimet ERGOCUT S65 torch features a BLOWBACK design with a Euro-type Central connector. Offering improved consumable life with a patented BACK STRIKING design.

Expanded/punched metal cutting by using continuous pilot arc model. Control provides timing of post flow air which increases consumable life and cools the torch for an extended period of time if desired.

The pre-installed NPT 1/4 industry type D plug and air filter regulator allows you to. Connect to your air compressor by using the stand coupler existing on your air compressor. You must contact me prior to returning an item. Check out my other items too-always something for everyone. The item "Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter" is in sale since Thursday, July 11, 2019. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "ubargain09" and is located in Sunnyvale, California. This item can be shipped to United States.

  • Model: CUT60D
  • Brand: LOTOS
  • Custom Bundle: No
  • MPN: CUT60D


Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter   Lotos CUT60D 60Amp Digital Control CNC Non-Touch Pilot Plasma Cutter