You are here

Powerplasma 50s Pilot Arc 50amp Cnc Plasma Cutter By Everlast With Ipt-60 Torch

PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch

PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch


PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch



PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch   
PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch

With the cutting power that the PowerPlasma 50 is capable of delivering coupled with the pilot arc feature, most people find it's the perfect solution to their metal cutting needs. With a recommended daily use cut capacity of up to 5/8 the unit takes care of materials found in small shops, home garages, and even in most fabrication facilities. Additionally, the PowerPlasma 50 can make a clean cut up to 3/4" with a total severance cut capacity of 1". The IGBT inverter design reduces size and weight to the point that the unit can be easily carried around with the shoulder strap so that you can always get to what you need to cut.

This unit performs well at a fraction of the cost, when compared with similar class units in the market place. Add in the dual voltage 120V/240V capability of this unit, the PowerPlasma 50 is one of the most versatile 40-50 amp class plasma cutters on the market. Even on 120V, the 25 amp output is enough to clean cut up to 3/16. This allows you the confidence for the PowerPlasma 50 to be the go-to machine when you aren't certain what the job conditions you are going to face.

With the industry standard, blowback start, this unit starts easily without contacting the metal and burns through paint and rust easily. It's also useful for cutting expanded metal. The unit also has a built in CNC port which allows the unit to cut lighter gauge materials on small plasma tables. Dual Voltage 120/240 V for maximum portability.

Adjustable Post Flow timer of up to 60 seconds exends consumable and torch life. Front Mounted air pressure regulator for easy adjustment. Front Mounted air pressure gauge for easy monitoring of air pressure. Euro style "Central" quick connect torch adapter. The ergonomic and flexible IPT-60 torch features blow back start.

Inexpensive consumables interchange with several different brands. 60% duty cycle is fit for commercial use. OverCurrent/Duty Cycle indicators and auto interrupt help protect the machine. OK-to-cut indicator/feature indicates when air pressure is sufficient to make a cut, and automatically stops output if air pressure is too low or has become disconnected. Can be used with 8500 watt clean power generators (less than 10% total harmonic distortion).
Water trap (this is not an air dryer). PTM-60 CNC machine torch (for use with CNC table). Small CNC tables with 1/4 or less capacity is needed continuously. Anywhere Oxy Fuel cutting is impractical, slow, expensive, or otherwise restricted or undesirable. Virtually all types of metal. When using the CNC port, with a plasma table, the unit should be limited to 40 amps which is the 100% duty cycle level of the machine if it is to be used continuously. A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear. The unit includes a regulator/water trap, but is not designed to remove all water or moisture. Plasma cutting capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speed.

If there is damage, we can help file a damage claim immediately. These packages will be refused and sent back to YOU at your cost. We will do our best to expedite backordered items as soon as possible.

3- Please provide a physical address. The item "PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch" is in sale since Monday, May 7, 2018. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Welding Equipment & Accessories\Welders, Cutters & Torches\Plasma Cutters". The seller is "fox_merchand" and is located in Daly City, California.

This item can be shipped to United States.

  • Current: 1 Phase
  • Torch included: yes, PT-60, 15 ft, plasma torch
  • Featured Refinements: Plasma Cutter Pilot Arc
  • Multiprocess: Yes
  • Model: PP50s-NOVA
  • MPN: PP50S-NOVA
  • Brand: Everlast
  • Processes: Plasma, CNC capable
  • Power Source: 110/220V Electric



PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch   
PowerPlasma 50S PILOT ARC 50amp CNC plasma cutter by Everlast with IPT-60 torch